2006 Toyota Tundra Cargo Light Replacement Cover

Installing Headlight Revolution LED Cargo Lights and Third Brake Light

Introduction

Are you looking to upgrade the lighting in your Toyota Tundra? Look no further than Headlight Revolution's LED cargo lights and third brake light. This guide will walk you through the installation process step-by-step.

Materials Needed

• Headlight Revolution LED cargo lights and third brake light
• Phillips screwdriver
• Flat-head screwdriver

Installation Instructions

LED Cargo Lights

1. Open the tailgate and locate the two cargo light assemblies.
2. Use a Phillips screwdriver to remove the two screws holding each assembly in place.
3. Disconnect the electrical connector from the assembly.
4. Pull the assembly out of the vehicle.
5. Connect the new LED cargo light to the electrical connector.
6. Insert the new LED cargo light into the vehicle.
7. Secure the new LED cargo light with the two screws.

Third Brake Light

1. Locate the third brake light assembly on the top of the tailgate.
2. Use a Phillips screwdriver to remove the two screws holding the assembly in place.
3. Disconnect the electrical connector from the assembly.
4. Pull the assembly out of the vehicle.
5. Connect the new LED third brake light to the electrical connector.
6. Insert the new LED third brake light into the vehicle.
7. Secure the new LED third brake light with the two screws.

Conclusion

Congratulations on installing your new Headlight Revolution LED cargo lights and third brake light! These upgrades will not only improve the visibility of your cargo area and brake lights but will also give your Tundra a stylish new look.

Disclosure

These are Amazon affiliate links. If you purchase a product or service with the links that I provide, I may receive a small commission. This helps me continue to create valuable content for my readers.

Youtube

1